,

Arduino Pro mini 16Mhz

Availability:

Out of stock


Compare
The Arduino Pro Mini is a microcontroller board based on the ATmega328.
It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.
The Arduino Pro Mini was designed and is manufactured by SparkFun Electronics.

50.00د.م.

Out of stock

This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

  • Microcontroller: ATmega328 *
  • Board Power Supply: 5 – 12 V
  • Circuit Operating Voltage: 5V
  • Digital I/O Pins: 14
  • PWM Pins: 6
  • UART: 1
  • SPI: 1
  • I2C: 1
  • Analog Input Pins: 6
  • External Interrupts: 2
  • DC Current per I/O Pin: 40 mA
  • Flash Memory: 32KB of which 2 KB used by bootloader *
  • SRAM: 2 KB *
  • EEPROM: 1 KB *
  • Clock Speed: 16 MHz

(*) Older boards were equipped with ATmega 168 with this specs:
– Flash memory: 16 KB
– SRAM: 1 KB
– EEPROM: 512 bytes

SKU: NA04 Categories: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Arduino Pro mini 16Mhz”

There are no reviews yet.