,

Endstop Mechanical Limit Switch Module with Cable

Availability:

39 in stock


Compare

The module V1.4 of Endstop Mechanical Limit Switch is an accessory designed for CNC machines. It is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum. Instead of messing with flags or complicated light beam interrupters, we use a mechanical switch. If we place the switch in the path of the stage, then the stage itself will simply close the switch when it moves against it. Other than properly positioning the switch, we do not need to modify the stage at all. If you’re worried about reliability, you can sleep well at night. The switches we use are rated for 1 million operations before failure. Since we only use the switches once per print, that means you’ll be able to do one million prints before having to replace the switch.

15.00د.م.

39 in stock

  • These microswitches have three connectors
    1 ) Com = wire to signal on your electronics
    2 ) Normally Closed (NC) = wire to ground on you electronics
    3 ) Normally Open = not required
  • Dimensions : 10cm x 10cm x 5cm
SKU: A1114 Categories: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Endstop Mechanical Limit Switch Module with Cable”

There are no reviews yet.